登越冶金科技股份有限公司介紹
The inspection equipment including :
CE-Meter : Analysis composition of molten iron C & Si before pouring.
Spectrometer : Analysis composition of iron , including C Si Mn P S V Cr Cu
Metallograph : Inspection the microstructure inoculation & nodularity status
Harness Tester : Examine the hardness of casting surface.
Tensioner : Test the strength of casting. including tension, bending strength , pressure strength.
Sand Tester : Inspection the sand quality. including moisture , ventilation and mold strength.
Motorcycle Parts
Category : Drum Brea , Sleeve , Insert Bearing , Boss Center , ... etc
Material : FC 150 ~ 250 , FCD 450 ~ 600
Industrial Parts
Category : Motor Bracket , Motor Frame , Sawing Machine Parts , Machine Parts .. etc
Material : FC150 ~ 300 , FCD 450 ~ 600
Vehicle Parts
Category : Pipe Flange , Cam Rotor , Cooling Compressor , .. etc
Material : FC 150 ~ 300 , FCD 450 ~ 700