迴轉式旋蓋機適用於帶螺紋的蓋與瓶的旋蓋，市場上現有的迴轉式旋蓋機大多數是半自動的包裝機，瓶蓋的疏理大多用人來完成，生產效率不是很高，而且加大了勞動強度，再生產時有一定危險，本設計為自動理蓋而且是多工位旋蓋。
本文介紹了題目的研究背景和意義，論述了旋蓋機在國內外的發展狀況，介紹了本次設計研究的內容及方法。本次設計的重點是包裝機的總體設計方案、包裝過程的旋蓋、輸送方式和定位方法，在此基礎上進行了運動與結構的設計。本次設計採用的包裝方法是迴轉式的，是通過圓柱凸輪的輪廓線來實現旋蓋頭的上下往複運動的，通過行星輪系傳遞轉矩的；而且在滿足包裝機械原理的條件下，充分考慮了整機的布局和經濟性，同時該機還有結構簡單、造價低、無污染、雜訊小和人及功能合理的特點。
關鍵詞：旋蓋機,旋蓋,輸送
Abstract
Rotary Capping Machine for the threaded cap and the bottle of screw cap, as the existing rotary capping machines are mostly semi-automatic packaging machine, bottle of Reorganizing the employer to complete most of the production efficiency is not very high and increased labor intensity, have a certain risk of reproduction, the design for the automatic management is a multi-position cap and screw cap.
This article describes the background and significance of the research topics discussed Capper development at home and abroad, introduces the design of this study the content and methods. The packaging machine is designed to focus the overall design scheme, the packaging process of screwing conveyance methods and positioning methods, in this based on the movement and structure design. The design of the packaging used is rotary, through cylindrical cam contour to achieve capping head up and down reciprocating motion through the planetary gear transmission torque; and packaging machinery to meet the conditions of principle, give full consideration to the machine layout and the economy, while machine is also simple, low cost, no pollution, noise and human and functional characteristics of reasonable.
Keywords: Capping Machine; capping; delivery.
目錄
摘要... I
II
目錄... III
第1章緒論... 1
設計題目背景... 1
研究意義... 1
國內外相關情況... 1
選題意義... 2
第2章總體方案設計... 3
設計任務分析... 3
設計參數... 3
工藝路線... 3
功能分析... 3
總功能確定... 3
各功能分解... 3
功能結構確定... 4
功能求解... 4
分功能原理解... 4
系統方案求解... 5
2.4 方案評價... 5
2.5系統方案原理圖... 5
各執行構件方案簡圖... 5
畫總體方案簡圖... 8
第3章執行系統設計計算... 9
3.1行星輪系的設計計算... 9
3.2旋蓋頭的設計計算... 10
3.3圓柱凸輪及行星輪的設計計算... 10
3.4輸送鏈設計計算... 10
第4章傳動系統設計計算... 12
4.1動力機的選擇... 12
4.2傳動比分配... 12
4.3各軸轉速、功率及轉矩的設計計算... 12
4.4傳動零件的設計計算... 13
圓錐齒輪傳動設計計算... 13
帶傳動設計計算... 17
鏈傳動設計計算... 19
軸的設計計算... 20
軸的強度校核... 25
軸承壽命計算... 26
第5章迴轉式旋蓋機的安裝、維護和安全... 29
第6章結論... 30
參考文獻... 31
致謝... 33
附錄Ⅰ英文原文... 34
附錄Ⅱ中文譯文... 38
