焊接辭彙表

   時間:2014-03-07 13:19:38
焊接辭彙表簡介
焊接機器人welding robot 點焊機器人spot welding robot 弧焊機器人arc welding robot 切割機器人cutting robot 焊接機器人……
焊接辭彙表正文

焊接機器人welding robot
 點焊機器人spot welding robot
 弧焊機器人arc welding robot
 切割機器人cutting robot
 焊接機器人生產線robot line for welding
 焊接機器人工作站welding robot station
 機器人運動自由degree of free for robot
 機器人工作空間robot working space
 波峰釺焊flow soldering/ wave soldering
 分級釺焊step brazing/ step soldering
 不等間隙釺焊brazing with the unparalleled clearance
 紅外線釺焊infra-red brazing (soldering)
 光束釺焊light soldering (brazing)
 激光釺焊laser brazing (soldering)
 電子束釺焊electron beam brazing
 釺接焊braze-welding
 釺料brazing filler metal/ solder
 硬釺料brazing filler metal
 軟釺料solder (m)
 自釺劑釺料self-fluxing brazing alloy/ self-fluxing filler metal
 活性釺料active filler metal/ active metal brazing alloy
 成形釺料preformed filler metal/ solder preform
 非晶態釺料amorphous filler metal
 粉狀釺料powdered filler metal
 釺料膏braze cream/ braze paste/ solder cream/ solder paste
 葯皮釺料 flux coated brazing(soldering)rod
 層狀釺料 sandwich filler metal
 葯芯釺料絲 flux-cored colder wire
 敷釺料板 clad brazing sheet
 釺劑 brazing flux; soldering flux
 氣體釺劑 gas flux
 反應釺劑 reaction flux
 松香釺劑 colophony flux; rosin flux
 釺劑膏 flux paste
 阻流劑 stopping-off agent
 釺劑活性 flux activity
 釺劑活性溫度範圍 activation temperature range of flux
 釺劑熱穩定性thermal stability of flux
 釺焊過程 brazing (soldering) process
 釺焊操作 brazing (soldering) operation
 工藝鍍層 technological coating
 釺焊面 faying face
 釺縫間縫 joint gap; joint clearance
 釺焊參數 brazing process variables
 釺焊溫度 brazing temperature
 釺焊時間 brazing time
 釺焊保溫時間 holding time of brazing
 釺縫 brazing seam; soldering seam
 釺縫界面區 interfacial region
 釺縫金屬 brace metal
 釺角 fillet
 釺焊接頭 braced joint; soldered joint
 平面搭接頭 joggled lap joint; flush lap joint
 搭接對接接頭 butt and lap joint
 搭接T形接頭 lapped T-joint; flanged T-joint
 鎖縫接頭 folded joint
 平面鎖縫接頭 lick side seam joint; flat lock seam joint
 鎖縫角接接頭 lock corner joint; corner double seam
 嵌入T形接頭 inset T joint
 T形管接頭 branch T saddle joint
 套管接頭 socket joint
 外喇叭口套管接頭 flare tube fitting
 擴口套管接頭 spigot joint
 釺焊性 brazability; solderability
 潤濕性 wettability
 潤濕角 wetting angle; contact angle
 鋪展性 spreadability
 鋪展係數 spread factor; coefficient of spreading
 釺著率 brazed rate
 脫釺 de-brazing; de-soldering
 潤濕稱量試驗 wetting balance test
 鋪展性試驗 spreadability test
 填縫性試驗 clearance fillability test
 未釺透 incomplete penetration
 虛釺 cold soldered joint
 釺料熔析 liquation of filler metal
 溶蝕 erosion
 釺料流失 brazing filler metal erosion
 釺劑夾雜 flux inclusion
 晶間滲入 intergranular penetration
 波峰釺焊機 wave soldering machine
 冷壁真空釺焊爐 cold wall type vacuum brazing
 熱壁真空釺焊爐 hot wall type vacuum brazing furnace
 釺焊盒 brazing retort
 釺劑塗敷器 fluxer
 釺炬 brazing (soldering) blowpipe
 噴燈 brazing lamp
 烙鐵 solder iron
 熱噴塗 thermal spraying
 火焰噴塗 flame spraying
 電弧噴塗 electric arc spraying
 等離子噴塗 plasma spraying
 高頻感應噴塗 high frequency spraying
 氣體爆燃式噴塗 detonation flame spraying
 金屬噴塗 metal spraying; metallizing
 塑料噴塗 plastic spraying
 陶瓷噴塗 ceramic spraying
 噴熔 spray-fusing
 表面粗糙化處理 surface roughening
 電火花拉毛 electrospark roughening
 拋錨效應 anchoring
 噴塗層 spray-fused coating
 噴熔層 spray-fused coating
 結合層 bond coating; under coating
 工作層 work coating
 結合強度 adhesive strength
 塗層強度 strength of coating
 封孔處理 sealing
 封孔劑 sealant
 噴塗率 spray rate
 沉積效率 deposition efficiency
 孔隙率 porosity
 噴塗材料 spraying material
 自熔劑合金粉末 self-fluxing alloy powder
 噴炬(槍)spray torch;
 熱切割 thermal cutting (TC)
 氣割 gas cutting; oxygen cutting
 氧溶劑切割 powder cutting
 氧-石英砂切割 quartz powder cutting
 電弧切割 arc cutting
 氧氣電弧切割 oxy-arc cutting
 空氣電弧切割 air arc cutting
 等離子弧切割 plasma arc cutting (PAC)
 空氣等離子弧切割 air plasma

 

arc cutting
 氧等離子切割 oxygen plasma arc cutting
 水再壓縮空氣等離子弧切割 air plasma water injection arc cutting
 雙層氣流等離子弧切割 dual gas plasma arc cutting; shielded gas plasma arc cutting
 激光切割 laser cutting(LC); laser beam cutting
 電子束切割 electron beam cutting
 噴氣激光切割 gas jet laser cutting
 碳弧切割 carbon arc cutting
 水下切割 underwater cutting
 噴水式水下電弧切割 waterjet method underwater arc cutting
 氧矛切割 oxygen lancing; oxygen lance cutting
 溶劑氧切割 powder lancing
 手工氣割 manual oxygen cutting
 自動氣割 automatic oxygen cutting
 仿形切割 shape cutting
 數控切割 NC (numerical-control) cutting
 快速切割 high-speed cutting
 垂直切割 square cut
 疊板切割 stack cutting
 坡口切割 beveling; bevel cutting
 碳弧氣割 carbon arc air gouging
 火焰氣刨 flame gouging
 火焰表面清理 scarfing
 氧熔劑表面修整powder washing
 預熱火焰preheat flame
 預熱氧preheat oxygen
 切割氧cutting oxygen/ cutting stream
 切割速度cutting speed
 切割線lone of cut/ cut line
 切割面face of cut/ cut face
 切口kerf
 切口上緣cutting shoulder
 切口寬度kerf width
 后拖量drag
 切割面平面度evenness of cutting surface/ planeness of cutting surface
 割紋深度depth of cutting veins/ stria depth
 切割面質量quality of cut face
 上緣熔化度shoulder meltability/ melting degree of shoulder
 切口角kerf angle
 缺口notch
 掛渣adhering slag
 結瘤dross
 割炬cutting torch/ cutting blowpipe/ oxygen-fuel gas cutting torch
 割槍cutting gun
 割嘴cutting nozzle/ cutting tip
 快速割嘴divergent nozzle/ high-speed nozzle
 表面割炬gouging blowpipe
 水下割炬under-water cutting blowpipe
 水下割條electrode for under-water cutting
 粉劑罐powder dispenser
 數控切割機NC cutting machine
 門式切割機flame planer
 光電跟蹤切割機photo-electric tracing cutting
 火焰切管機pipe flame cutting machine
 磁輪式氣割機gas cutting machine with magnetic wheels
 焊接結構welded structure/ welded construction
 焊件weldment
 焊接部件weld assembly
 組裝件built-up member
 接頭設計joint design
 焊接應力welding stress
 焊接瞬時應力transient welding stress
 焊接殘餘應力welding residual stress
 熱應力thermal stress
 收縮應力contraction stress
 局部應力local stress
 拘束應力constraint stress
 固有應力inherent stress
 固有應變區inherent strain zone
 殘餘應力測定residual stress analysis
 逐層切割法Sach』s method X射線衍射法X-ray stress analysis
 小孔釋放法Mathar method
 固有應變法inherent strain method
 消除應力stress relieving
 局部消除應力local stress relieving
 應力重分佈stress redistribution
 退火消除應力stress relieving by annealing
 溫差拉伸消除應力low temperature stress relieving
 機械拉伸消除應力mechanical stress relieving
 應力鬆弛stress relaxation
 焊接變形welding deformation
 焊接殘餘變形welding residual deformation
 局部變形local deformation
 角變形angular distortion
 自由變形free deformation
 收縮變形contraction deformation
 錯邊變形mismatching deformation
 撓曲變形deflection deformation
 波浪變形wave-like deformation
 火焰矯正flame straightening
 反變形backward deformation
 焊接力學welding mechanics
 斷裂力學fracture mechanics
 彈塑性斷裂變形elasto-plastic fracture mechanics
 線彈性斷裂力學linear elastic fracture mechanics
 延性斷裂ductile fracture
 脆性斷裂brittle fracture
 應力腐蝕開裂stress corrosion cracking
 熱應變脆化hot straining embrittlement
 臨界裂紋尺寸critical crack size
 裂紋擴展速率crack propagation rate
 裂紋張開位移(COD)crack opening displacement
 拘束度restraint intensity
 拘束係數restraint coefficient
 應變速率strain rate
 斷裂韌度fracture toughness
 應力強度因子stress intensity factor
 臨界應力強度因子critical stress intensity factors
 應力腐蝕臨界應力強度因子critical stress intensity factor of stress corrosion cracking
 J積分J-integration
 羅伯遜止裂試驗Robertson crack arrest test
 ESSO試驗ESSO test
 雙重拉伸試驗doucle tension test
 韋爾斯寬板拉伸試驗Well』s wide plate test
 帕瑞斯公式Paris formula
 斷裂分析圖fracture analysis diagram
 焊接車間welding shop
 焊接工作間welding booth
 焊接工位welding post/ welding station
 焊接環境welding surrou

 

ndings
 焊工welder
 電焊工manual arc welder
 氣焊工gas welder
 焊接檢驗員weld inspector
 焊工培訓welders training
 焊工模擬訓練器trainer of synthetic weld
 焊工考試welder qualification test
 焊工合格證welder qualification/ welder qualified certification
 鋼板預處理steel plate pretreatment
 噴沙sand blast
 噴丸shot blast
 矯正straighten
 開坡口bevelling (of the edge)/ chanfering
 裝配assembly/ fitting
 安裝erect
 剛性固定rigid fixing
 裝配焊接順序sequence of fitting and welding
 焊接工藝評定welding procedure qualification
 焊接工藝規程welding procedure specification
 焊接工藝試驗welding procedure test
 焊接工藝卡welding procedure card
 工序operational sequence
 焊接材料消耗定額welding consumables quota
 焊接工時定額welder-hour quota
 清渣slag removal
 清根back gouging/ back chipping
 錘擊peening
 返修次數number of rewelding
 焊接工作台welding bench
 裝焊平台welding platen
 電磁平台electromagnetic platen
 焊接翻轉機welding tilter
 焊接迴轉台floor turnable positioner
 焊接變位機positioner
 焊接滾輪架turning rolls
 焊接操作機manpulator
 焊工升降台welder』s lifting platform
 焊接夾具welding jig/ fixture
 磁力夾緊器magnetic jig
 螺旋推撐器screw operated tensioning unit
 焊絲盤繞機welding wire coiler
 焊條壓塗機welding electrode extrusion press
 紅外線加熱器infra-red heater
 乾燥箱dryer
 焊條保溫筒thermostat for electrode
 流量計flow meter
 CO2預熱器CO2 heater
 CO2乾燥器CO2 desiccator
 焊接電纜welding cable
 電纜夾頭welding connector
 地線earth lead
 地線夾頭earth clamp
 焊接參數記錄儀welding parameter recorder
 焊縫檢測規weld gauge
 噴嘴通針tip cleaner
 測溫筆tempil stick
 敲渣錘chipping hammer
 焊接襯墊backing/ welding backing
 保留墊板fusible backing/ permanent backing
 臨時墊板temporary backing
 焊劑墊flux backing
 惰性氣體襯墊inert-gas backing
 引弧板run-on tab/ end tab/ starting weld tab
 引出板run-off tab/ end tab
 定位板strong-back
 加強勒stiffener
 嵌條insert
 套環ferrule
 面罩helmet
 濾光鏡片filter glass/ welding glass
 防護鏡片cover glass/ plain glass
 氣焊眼鏡welding goggles
 軌跡重複精度path repeatability
 點位重複精度PTP repeatability
 焊接專家系統welding expert system
 焊接機器人示數welding robot play back
 焊接圖象識別pattern recognition for welding
 焊接圖象處理welding image processing
 計算機輔助焊接工藝設計computer-aided welding process programming (CAWPP)
 計算機輔助焊接結構設計computer-aided design for welding structure
 焊接煙塵weld fume
 焊接發塵量total amount of fumes
 焊接煙塵濃度weld fume concentration
 焊接煙塵容限濃度threshold limit values of weld fume (TLV)
 焊接發塵速率weld fume emission rate
 焊接有害氣體welding toxic gases/ weld harmful gases
 標定衛生空氣需要量nominal hygienic air requirement
 焊工塵肺pheumocomsis of welder
 焊工錳中毒chronic occupational manganese poisoning of welder
 焊工氟中毒fluorosis of welder
 焊工金屬煙熱metal fume fever of welder
 電光性眼炎eye-flash (arc eye)
 電光性皮炎electro-photo dermatitis
 電弧紫外線灼傷ultraviolet ray burn
 防電擊裝置voltage reducing device
 除塵裝置dust collection device
 焊工手套welding gloves
 護腳welding spats
 防護鞋shielding shoes
 焊接欠缺welding imperfection
 焊接缺陷weld defect
 氣孔blowhole/ gas pore
 針尖狀氣孔pinhole
 密集氣孔porosity
 條蟲狀氣孔wormhole
 裂紋crack
 表面裂紋surface crack
 咬邊undercut
 焊瘤overlap
 凹坑pit
 燒穿burn through
 塌陷excessive penetration
 未焊透incomplete penetration/ lack of penetration
 未熔合lack of fusion/ incomplete fusion
 未焊滿incompletely filled weld
 根部凹陷root concavity
 電弧擦傷arc scratch
 夾渣slag inclusion
 夾雜物inclusion
 夾鎢tungsten inclusion
 白點fish eye/ flake
 錯邊misalignment/ dislocation
 試件test piece
 試樣test specimen
 無損檢驗nondestructive test
 破壞檢驗destructive test
 外觀檢查visual examination
 超聲波探傷ultrasonic inspection
 直射法超聲波探傷straight beam method
 斜射法超聲波探傷angle beam method
 液浸法超聲波探傷immersion method
 射線探傷radiographic inspection/ radiography
 X射線探傷X-ray radiographic inspection
 γ射線探傷gamma-ray inspection
 X射線工業電視探傷

 

X-ray industrial television inspection
 磁粉探傷magnetic particle inspection
 電磁探傷electromagnetic inspection/ eddy current test
 探傷靈敏度flaw detection sensitivity
 滲透探傷penetration inspection
 熒光探傷flurescent penetrant inspection
 著色探傷dye penetrant inspection
 密封性檢驗leak test
 氣密性檢驗air tight test
 枕形氣密檢驗pillow test
 耐壓檢驗pressure test
 水壓檢驗hydraulic test
 氣壓檢驗pneumatic test
 液晶檢驗liquid crystal test
 聲發射檢測acoustic emission testing
 面彎試驗face bend testing
 背彎試驗root bend test
 側彎試驗side bend test
 橫彎試驗horizontal bend test
 縱彎試驗axial bend test
 壓扁試驗squeezing test
 頂鍛時間 upset time; upsetting time
 有電頂鍛時間 upset current time
 無電頂鍛時間 upset current-off time
 閃光速度 flashing speed
 閃光電流 flashing current; flash current
 頂鍛電流 upset current
 預熱電流 preheat current
 回火電流 temper current
 調伸長度 initial overhange; extension
 總留量 total allowance
 閃光留量 flash allowance
 頂鍛留量 upset allowance
 頂鍛速度 upset speed
 電極接觸面 electrode contact surface
 貼合面 faying surface
 焊點 welding spot
 熔核 nugget
 熔核直徑 diameter of nugget
 塑性金屬環區corona bond
 焊透率penetration rate
 壓痕indentation
 壓痕深度depth of indentation
 壓深率indentation ratio
 翹離sheet separation
 縮孔shrinkage cavity
 鬍鬚intrusion
 電極粘損electrode pick up
 噴濺splash/ expulsion
 毛刺fin
 飛邊upset metal/ fin
 焊點距weld spacing/ spot weld spacing
 邊距edge distance
 分流shunt current
 接觸電阻contact resistance
 電阻焊機resistance welding machine
 點焊機spot welding machine
 多點焊機multiple spot welding machine
 移動式點焊機portable spot welding machine
 縫焊機seam welding machine
 縱橫兩用縫焊機universal seam welder
 對焊機butt resistance welding machine
 凸焊機projection welding machine
 三相低頻焊機three phase low frequency welder
 二次整流電阻焊機direct current resistance welder secondary rectification
 電容儲能電阻焊機condenser discharge resistance welder
 電容儲能點焊機condenser type spot welder/ capacitor spot welding machine
 工頻電阻焊機mains frequency resistance welding machine
 低頻電阻焊機frequency converter resistance welding machine
 高頻焊機high frequency induction welder
 逆變式電阻焊機inverter type resistance welding machine
 全波阻焊電源full wave resistance welding power source
 斬波阻焊電源chopped wave resistance welding power source
 旋轉焊接變壓器rotary welding transformer
 點焊鉗spot welding head
 C形點焊鉗C-type welding head/ C-type gun
 X形點焊鉗pincer spot welding head/ pliers spot welding head
 斷續器contactor
 同步斷續器synchronous contactor
 非同步斷續器non-synchronous contactor
 程序控制器sequencer
 程序時間調節器sequencer timer
 電極臂arm
 電極握桿electrode holder
 電極台板backup die/ bolster
 電極水冷管electrode cooling tube
 電極頭electrode tip
 電極帽electrode cap
 錐頭電極truncated tip electrode
 平頭電極flat tip electrode
 尖頭電極pointed tip electrode
 球面電極radius tip electrode
 偏心電極offest electrode
 直電極straight electrode
 彎電極cranked electrode
 雙彎電極double cranked (swannecked) electrode
 滾輪電極circular electrode/ welding wheel
 斜棱滾輪電極bevelled wheel
 頂鍛機構upsetting mechanism
 電極總行程total electrode stroke
 工作行程operational stroke
 輔助行程electrode travel/ electrode stroke
 臂間距離horn spacing/ throat opening
 電極臂伸出長度arm extension
 摩擦焊friction welding (FW)
 轉速friction speed
 摩擦壓力friction pressure/ heating pressure
 摩擦轉矩friction torque
 摩擦時間friction time
 摩擦變形量burn-off length
 摩擦變形速度burn-off rate
 停車時間stopping time
 頂鍛變形量forge length
 頂鍛變形速度forge rate
 摩擦表面friction surface
 儲能摩擦焊fly-wheel type friction welding
 徑向摩擦焊radial friction welding
 擴散焊diffusion welding (DW)
 過渡液相擴散焊transient liquid phase diffusion welding
 熱等靜壓擴散焊hot isotatic pressure diffusion welding
 熱軋擴散焊roll diffusion welding
 擴散縫焊seam diffusion welding
 超塑成形擴散焊supperplastic forming diffusion bounding
 隔離劑buttering mater

 

ial
 爆炸焊explosive welding (EW)
 爆炸點焊explosive spot welding
 爆炸線焊explosive line welding
 多層板爆炸焊explosive welding of multiplayer plates
 多層管爆炸焊explosive welding of multiplayer tubes
 覆板(覆管)cladding plat (tube)/ flyer plate (tube)
 基板(基管)base plate(tube)/ parent plate (tube)
 保護層buffer/ protector
 基礎base
 預置角preset angle
 間距initial stand-off/ spacing
 裝藥量explosive load
 裝葯密度charge density/ loading density
 質量比mass ratio
 平行法parallel plate configuration
 角度法preset angle configuration
 均勻布葯average arranging explosive
 梯形布葯gradient arranging explosive
 爆炸焊參數explosive welding parameters
 初始參數initial parameters
 動態參數dynamic parameters
 界面參數interface parameters
 爆轟速度detonation velocity
 覆板速度cladding plate velocity
 碰撞點impact point
 碰撞點速度velocity of the impact point
 彎折角bending angle
 碰撞角collision angle
 碰撞壓力impact pressure
 格尼能Gurney energy
 垂直碰撞normal impact
 傾斜碰撞oblique impact/ inclined impact
 對稱碰撞symmetrical impact
 來流upper stream
 出流down stream
 再入射流re-entrant jet
 自清理oneself cleaning
 結合區bond zone
 平面結合plane bond
 波狀結合wave-like bond
 界面波長length of the interfacial wave
 界面波幅amplitude of the interfacial wave
 熔化層molten layer
 熔化袋molten pocket
 雷管區detonator zone
 邊界效應edge effect
 焊接性窗口weldability windows
 焊著率ratio of welding area
 起爆方法method of initiation
 內爆法internal explosion process
 外爆法external explosion process
 半圓柱試驗法semi-cylinder experiment method
 超聲波焊ultrasonic welding (UW)
 超聲波點焊ultrasonic spot welding
 超聲波縫焊ultrasonic seam welding
 超聲波點焊機ultrasonic spot welder
 超聲波縫焊機ultrasonic seam welder
 冷壓焊cold pressure welding (CPW)
 熱壓焊hot pressure welding
 熱軋焊hot roll welding
 旋弧壓力焊rotating arc pressure welding
 埋弧壓力焊submerged arc pressure welding
 電渣壓力焊electroslag pressure welding
 氣壓焊gas pressure welding
 鍛焊forge-welding/ blacksmith welding
 磁力脈衝焊magnetic-pulse welding
 硬釺焊brazing
 軟釺焊soldering
 烙鐵釺焊iron soldering
 火焰釺焊torch brazing/ torch soldering
 熱風釺焊hot gas soldering
 感應釺焊induction brazing
 電阻釺焊resistance brazing
 接觸反應釺焊contact-reaction brazing
 電弧釺焊arc brazing
 浸漬釺焊dip brazing/ dip soldering
 鹽浴釺焊saltbath dip brazing (soldering)
 金屬浴釺焊molten metal bath dip brazing
 爐中釺焊furnace brazing/ furnace soldering
 保護氣氛釺焊brazing in controlled atmosphere
 真空釺焊vacuum brazing
 蒸氣釺焊vapor phase soldering
 超聲波釺焊ultrasonic soldering
 擴散釺焊diffusion brazing
 熱絲MIG焊hot wire MIG welding
 MIG熔接metal electrode insert gas welding
 X射線衍射法X-ray stress analysis
 X射線探傷X-ray radiographic inspection
 X射線工業電視探傷X-ray industrial television inspection
 Tigamajig 薄板焊接裂紋試驗Tigamajing thin plate cracking test
 熱絲TIG焊hot wire TIG welding
 100℃殘餘擴散氫diffusible hydrogen remained at 100℃
 射頻熔接; 高頻焊接radio-frequency welding
 預熱preheat
 預熱preheat
 預熱溫度preheat temperature
 預熱時間preheat time
 預熱電流preheat current
 預熱火焰preheat flame
 預熱氧preheat oxygen
 CO2預熱器CO2 heater
 預熱Preheating
 預熱溫度Preheat temperature
 錯邊量unfitness of butt joint
 埋弧焊submerged arc welding (SAW)
 埋弧焊Submerged arc welding (SAW)
 自動埋弧焊automatic submerged arc welding
 窄間隙埋弧焊焊劑flux for narrow-gap submerged arc welding
 埋弧焊submerged arc welding (SAW)
 多絲埋弧焊multiple wire submerged arc welding
 縱列多絲埋弧焊Tandem sequence (submerged-arc welding)
 橫列多絲埋弧焊series submerged arc welding (SAW-S)
 橫列雙絲並聯埋弧焊transverse submerged arc welding
 熱絲埋弧焊hot wire submerged-arc welding
 窄間隙埋弧焊narrow-gap submerged arc welding
 埋弧焊機submerged arc welding machine
 接合線, 焊線埋弧焊bonding wire
 埋弧焊Submerged arc welding (SAW)
 對接接頭butt joint
 對接接頭banjo fixing butt jointing
 對接接頭butt joint
 I形對接接頭square butt joint
 V形對接接頭single V butt joint

 

 U形對接接頭single U butt joint
 雙V形對接接頭double V butt joint
 雙單邊V形對接接頭double bevel butt joint/ K groove butt joint
 帶鈍邊U形對接接頭double U butt joint
 鎖底對接接頭lock butt joint
 斜對接接頭oblique butt joint
 對接接頭banjo fixing butt jointing
 搭接對接接頭butt and lap joint
 焊接weld
 硬焊, 銅焊, 釺焊braze welding
 焊接法, 定位焊接welding
 碳極弧焊carbon arc weld
 平焊縫downhand weld
 凹角焊concave fillet weld
 氣壓焊gas-pressure weld
 凸面對焊法爛raised face welding neck flange
 軌端補焊rail-end welding
 射頻熔接; 高頻焊接radio-frequency welding
 自動點焊法automatic spot weld
 爆炸焊接explosive weld
 特形焊接contour weld
 坡口焊groove weld
 雙斜邊坡口焊縫, K形坡口焊縫double-bevel groove weld
 對接焊縫butt weld
 焊(接)件weldment
 無焊縫的weldless
 可焊的weldable
 硬焊, 銅焊, 釺焊braze welding
 可焊的weldable
 空氣-乙炔焊接air-acetylene welding
 氬弧焊argon arc welding
 自動電渣焊automatic slag-pool welding
 自動調弧氬弧焊, 惰性氣體保護金屬極弧焊aircomatic welding
 鑄焊, 鋁熱劑焊接aluminothermic welding
 對接焊, 對焊butt welding
 不鏽鋼(焊條)焊接austenite welding
 自動埋弧焊automatic submerged arc welding
 氬護電弧焊argon shielded arc welding
 焊工welder
 焊工Weldor
 焊工護目鏡welding goggles
 焊工welder
 電焊工manual arc welder
 氣焊工gas welder
 焊工培訓welders training
 焊工模擬訓練器trainer of synthetic weld
 焊工考試welder qualification test
 焊工合格證welder qualification/ welder qualified certification
 焊工升降台welder』s lifting platform
 焊工塵肺pheumocomsis of welder
 焊工錳中毒chronic occupational manganese poisoning of welder
 焊工氟中毒fluorosis of welder
 焊工金屬煙熱metal fume fever of welder
 焊工手套welding gloves
 焊機,焊工Welder
 焊工技術鑒定試驗Welder performance qualification test
 電焊工的長手套Welder』s gauntlets
 電焊工手套Welder』s gloves
 焊工護目鏡Welder』s goggles
 焊工手持護目鏡welder』s hand shield
 焊工護目帽罩Welder』s head shield
 焊工保健Welder』s health
 焊工帽罩Welder』s helmet
 焊工的圍裙Welding apron
 焊工班,焊接組Welding gang
 焊工帽罩Welding helmet
 焊工握把Welding holder
 自動焊工Welding operator
 焊工工作Welding work
 焊工Weldor
 鑄焊, 鋁熱劑焊接aluminothermic welding
 熱風焊hot gas welding
 熱輸入heat input
 預熱preheat
 后熱postheat
 焊后熱處理posweld heat treatment/postheat treatment
 預熱溫度preheat temperature
 后熱溫度postheating temperature
 熱陰極hot cathode
 焊接熱循環weld thermal cycle
 焊接熱源welding heat source
 點熱源point heat source
 線熱源linear heat source
 面熱源plane heat source
 瞬時集中熱源instantaneous concentration heat source
 熱效率thermal efficiency
 熱能集中係數coefficient of heat flow concentration
 去氫熱處理heat treatment for dehydrogenation
 過熱組織overheated structure
 熱焊接性thermal weldability
 熱影響區heat-affected zone (HAZ)
 過熱區overheated zone
 熱影響區裂紋heat-affected zone crack
 熱裂紋hot crack
 再熱裂紋reheat crack
 分塊形槽熱裂紋試驗segmented circular groove cracking test
 繆雷剋期熱裂紋試驗Murex hot cracking test
 熱朔性試驗hot-ductility test
 熱影響區衝擊試驗impact test of HAZ
 熱影響區模擬試驗synthetic heat-affected zone test
 焊接技術welding technique
 電阻焊 resistance welding (RW)
 點焊 spot welding; resistance spot welding
 凸焊 projection welding
 縫焊 seam welding
 滾點焊 roll-spot welding
 連續點焊 stitch welding
 多點焊 multiple spot welding
 手壓點焊 push welding; poke welding
 脈衝點焊 pulsation spot welding; multiple-impulse welding
 雙面點焊 direct spot welding
 單面點焊 indirect spot welding
 串聯點焊 series spot welding
 多點凸焊multiple projection welding
 頻道進縫焊 step-by-step seam welding
 壓平縫焊 mash seam welding
 串聯縫焊 series seam welding
 對接縫焊 butt seam welding; foil-butt seam
 電阻對焊 upset butt welding
 閃光對焊 flash butt welding (FBW)
 儲能焊 stored energy welding
 電容儲能點焊 condenser discharge spot welding
 高頻電阻焊 high frequency resistance welding
 衝擊電阻焊 percussion welding
 膠接點焊 spot weld-bonding; weld-bonding
 閃光 flashi

 

ng; flash
 過梁 bridge; lintel
 頂鍛 upsetting; upset
 夾緊力 clamping force
 頂鍛力 upsetting force; upset force
 電極壓力 electrode force; electrode pressure
 電極滑移 electrode skid
 焊接循環 welding cycle
 預壓時間 squeeze time
 鍛壓時間 forge-delay time; forge time
 焊接通電時間(電阻焊)welding time (resistance welding)
 預熱時間 preheat time
 加熱時間 heat time
 冷卻時間 cool time
 間歇時間 quench time; chill time
 回火時間 temper time
 維持時間 hold time
 休止時間 off time
 閃光時間flash time; flashing time
  

 

[焊接辭彙表],你可能也喜歡

  • 焊接符號
  • 焊接符號說明
  • 焊接符號標示
  • 焊接符號 typ
  • autocad焊接符號
Bookmark the permalink ,來源:
One thought on “焊接辭彙表